Plumbing Efficiency Research Coalition Report

The Drainline Transport of Solid Waste in Buildings

The Plumbing Efficiency Research Coalition (PERC) released The Drainline Transport of Solid Waste in Buildings report in November 2012.  The study provided important insights into the performance of long buildings building drains that can be found in commercial buildings, and highlighted needs for future research.  This page provides an overview and links to download the final report and associated materials.

PERC Drainline Study ReportPERC was formed in January 2009 through a Memorandum of Understanding (MOU) to develop research projects that support the development of water efficiency and sustainable plumbing products, systems and practices.  Projects are financed through government grants, foundations and private financing.  The Coalition is comprised of industry organizations seeking to conduct much-needed research in a number of areas.  PERC identified drainline transport as its first research project.

In January 2011, PERC signed a MOU with the Australasian Scientific Review of Reduction of Flows on Plumbing and Drainage Systems Committee (ASFlow) at the offices of the U.S. Environmental Protection Agency (EPA).  The MOU details several areas of collaboration between the groups to ensure that research efforts are not duplicated and that information and results are shared.  ASFlow has also studied the impact of reduced water flow in sanitary drainage systems.

After the parameters of the project were defined, the coalition began seeking funding.  Many funders stepped up to the plate and are listed at the bottom of the page.  American Standard generously provided space and a drainline testing apparatus at its Product Development Design Center in Piscataway, New Jersey.  The test procedure consisted of 40 test runs with each run consisting of 100 flushes from a surge injector.  The surge injector was used to provide the required flush volume 0.8, 1.28, or 1.6 gallons (3.0, 4.8, or 6.0 liters ), flush rate, and percent trailing water. 

Project Outcomes

The results of the study demonstrate how changes in variables such as flush volume, toilet paper, and pipe slope impact drainline function.   Due to the uncertainty surrounding the use of high-efficiency toilets (HETs) in nonresidential buildings, many municipalities were hesitant to move forward with programs that would replace inefficient toilets with HETs for the commercial sector.  Organizations like AWE could not recommend the use of HETs in commercial buildings with confidence, and WaterSense® did not pursue a specification for commercial HETs.  Based on the findings of the study, the PERC Technical Committee recommended that WaterSense® should, “expand their specification on toilets to include commercial flushometer-valve operated HETs.”

Key findings:

  • Percent trailing water and flush rate were found to be non-significant variables.
  • The 5 gallon clearing flush failed to clear drainlines in 7 of 39 test runs and is not a recommended low cost solution at the frequency levels used in the study.
  • Pipe slope was identified as a significant variable impacting drainline carry.
  • Toilet paper was identified as an important variable, specifically the wet tensile strength.
  • Flush volume was identified as a significant variable.
  • 0.8gpf (3.0 Lpf) flush volumes  were evaluated and the results indicate that  they may be, “problematic in commercial installations that have long horizontal drains and little or no additional long duration flows available to assist the toilet in providing drainline transport of solids.”
  • The results identified a possible inverse effect of the slope test variable at the 0.8 gallon (3.0 L) test run level.

Future Research

This study produced extremely valuable results.  It also highlights areas in which the study could be strengthened to increase the understanding of drainline carry.  Those include:

  • Pipe diameter.  The study used a 4 inch diameter pipe and the authors expressed the importance of assessing 4 inch pipe in the future.
  • Slope.  Future studies should analyze slope increments between one and two percent.
  • Different pipe materials.  The testing apparatus was made of plastic.  Future studies could utilizes materials that are found in real world drainlines such as cast iron.
  • Continued investigation of clearing flushes.  The study found that an intermittent 5 gallon flush was not successful in clearing drainlines.  Future studies could investigate clearing flushes of higher volumes that occur less frequently.
  • Further examine slope at 0.8 gallon per flush.  The study identified a possible inverse effect of the slope variable when testing the 0.8 gallon (3.0 L) level.
  • Continue to test flush volumes of less than 1.28 gpf (4.8 L).  According to the authors, “Volume levels between 1.28 gallons (4.8 L) and 0.8 gallons (3.0 L) must be evaluated to determine at what levels drainline performance becomes chaotic, leading to an increased potential for clogging failures.”
  • Flushable products.  Study the impact of additional toilet paper tinsel strengths,  and include other items that are flushed such as moisturized non-woven “wipes”, paper toilet seat covers.

File Downloads

  1. DrainlineTransport Study FAQs (PDF)
  2. AWE Drainline Transport Study Webinar (PowerPoint) 
  3. The Drainline Transport of Solid Waste in Buildings full report  (PDF)
  4. Drainline Transport Study Data File (XLS)
  5. Drainline Transport Study Raw Data for All 40 Test Runs 

PERC Executive Committee Representatives

Mary Ann Dickinson: Alliance for Water Efficiency (AWE)
Jim Kendzel: American Society of Plumbing Engineers (ASPE)
Peter DeMarco: International Association of Plumbing and Mechanical Officials (IAPMO)
Jay Peters: International Code Council (ICC)
Gerry Kennedy: Plumbing-Heating-Cooling Contractors National Association (PHCC)
Barbara C. Higgens: Plumbing Manufacturers International (PMI)

Study Technical Committee (TC)

John Koeller: AWE
Milt Burgess: ASPE
Peter DeMarco, (Project Technical Director): IAPMO
Shawn Martin: ICC
Charles White: PHCC
Len Swatkowski: PM

Phase 1 Funding Partners

Alliance for Water Efficiency
American Society of Plumbing Engineers
American Society of Sanitary Engineers
Best Management Partners
City of Calgary, Alberta
Delta Faucet Company
Donald Roberts, P.E.
Duravit USA, Inc.
Fort Collins Utilities
Gerber Plumbing Fixtures LLC, a subsidiary of Globe Union Group, Inc.
Hansgrohe, Inc.
International Association of Plumbing and Mechanical Officials
International Code Council
Koeller and Company
Kohler Company
Natural Resources Defense Council
PlumbTech, LLC
Plumbing – Heating – Cooling Contractors National Association
Plumbing Manufacturers International
Portland Water Bureau
Sloan Valve Company
Sonoma County Water Agency
Southern Nevada Water Authority
Veritec Consulting, Inc.
Waterless Company